Women in WWE - Championships and accomplishments - Championship reigns

Download in Excel, CSV or JSON

Structured data parsed from Wikipedia. Championship reigns This chart lists every female wrestler who held more than one title in the company, including male contested titles. The list is in chronological order. The first woman on the list is Leilani Kai who won the WWF Women's Tag Team Championship and the WWF Women's Championship in 1985. The final woman is Asuka who won the NXT Women's Championship and the WWE SmackDown Women's Championship in 2016 and 2018, respectively. Charlotte Flair is the only Superstar to have won four women's championships in WWE history (NXT, Divas, Raw, and SmackDown). There are two titles under the name WWE Women's Championship. On September 18, 1956, The Fabulous Moolah became the inaugural WWF Women's Champion as recognized by WWE. The WWF Women's Championship is descended from the original NWA World Women's Championship of the National Wrestling Alliance (NWA), which is still active today. In 1983, the World Wrestling Federation (WWF, now WWE) disaffiliated with the NWA and recognized then NWA World Women's Champion The Fabulous Moolah as the promotion's Women's Champion. AJ Lee became the first woman to hold the FCW Divas Championship & the WWE Divas Championship &was the first woman ever to defend the Divas Championship at WrestleMania. Paige became the first female double champion when she won the WWE Divas Championship in her debut while also being the NXT Women's Champion in 2014. The second title was introduced on April 3, 2016 at WrestleMania 32 to replace the Divas Championship, with Charlotte Flair (at the time simply known as Charlotte) becoming the first WWE Women's Champion of the second title. In August 2016, the WWE created the SmackDown Women's Championship. Naomi became the first woman to hold the FCW Divas Championship & the SmackDown Women's Championship. As of the current WWE system, on April 30, 2017, Alexa Bliss became the first woman in the WWE to hold the women's titles on both brands of WWE.

Data Source : WIKIPEDIA
Number of Data columns : 13 Number of Data rows : 24
Categories : economy, demography, politics, knowledge


Data row number Women WWF/WWE Women's Championship WWF Women's Tag Team Championship WWE Divas Championship WWE Raw Women's Championship WWE SmackDown Women's Championship WWE Women's Tag Team Championship NXT Women's Championship FCW Divas Championship Queen of FCW WWF/WWE Intercontinental Championship WWF/WWE Hardcore Championship WCW/WWE Cruiserweight Championship

Download the dataset to see the full list of 24 entries

Data Columns

Name Description Data Type
Women text
WWF/WWE Women's Championship text
WWF Women's Tag Team Championship text
WWE Divas Championship text
WWE Raw Women's Championship text
WWE SmackDown Women's Championship text
WWE Women's Tag Team Championship text
NXT Women's Championship text
FCW Divas Championship text
Queen of FCW text
WWF/WWE Intercontinental Championship text
WWF/WWE Hardcore Championship text
WCW/WWE Cruiserweight Championship text

Other datasets published on Basedig

CD-ROM - CD-ROM drives - Transfer rates


Structured data parsed from Wikipedia. Transfer rates CD ROM drives are rated with a speed factor relative to music CDs. If a CD ROM is read at the same rotational speed as an audio CD, the data transfer rate is 150 KiB/s, commonly called '1×'. At this data rate, the track moves along under the laser spot at about 1.2 m/s. To maintain this linear velocity as the optical head moves to different positions, the angular velocity is varied from 500 rpm at the inner edge to 200 rpm at the outer edge. The 1× speed rating for CD ROM (150 KiB/s) is different from the 1× speed rating for DVDs (1.32 MiB/s). By increasing the speed at which the disc is spun, data can be transferred at greater rates. For example, a CD ROM drive that can read at 8× speed spins the disc at 1600 to 4000 rpm, giving a linear velocity of 9.6 m/s and a transfer rate of 1200 KiB/s. Above 12× speed most drives read at Constant angular velocity (CAV, constant rpm) so that the motor is not made to change from one speed to another as the head seeks from place to place on the disc. In CAV mode the '×' number denotes the transfer rate at the outer edge of the disc, where it is a maximum.20× was thought to be the maximum speed due to mechanical constraints until Samsung Electronics introduced the SCR 3230, a 32x CD ROM drive which uses a ball bearing system to balance the spinning disc in the drive to reduce vibration and noise. As of 2004, the fastest transfer rate commonly available is about 52× or 10,400 rpm and 7.62 MiB/s. Higher spin speeds are limited by the strength of the polycarbonate plastic of which the discs are made. At 52×, the linear velocity of the outermost part of the disc is around 65 m/s. However, improvements can still be obtained using multiple laser pickups as demonstrated by the Kenwood TrueX 72× which uses seven laser beams and a rotation speed of approximately 10×. The first 12× drive was released in late 1996. Above 12× speed, there are problems with vibration and heat. CAV drives give speeds up to 30× at the outer edge of the disc with the same rotational speed as a standard constant linear velocity (CLV) 12×, or 32× with a slight increase. However, due to the nature of CAV (linear speed at the inner edge is still only 12×, increasing smoothly in between) the actual throughput increase is less than 30/12: in fact, roughly 20× average for a completely full disc, and even less for a partially filled one. Problems with vibration, owing to limits on achievable symmetry and strength in mass produced media, mean that CD ROM drive speeds have not massively increased since the late 1990s. Over 10 years later, commonly available drives vary between 24× (slimline and portable units, 10× spin speed) and 52× (typically CD and read only units, 21× spin speed), all using CAV to achieve their claimed 'max' speeds, with 32× through 48× most common. Even so, these speeds can cause poor reading (drive error correction having become very sophisticated in response) and even shattering of poorly made or physically damaged media, with small cracks rapidly growing into catastrophic breakages when centripetally stressed at 10,000–13,000 rpm (i.e. 40–52× CAV). High rotational speeds also produce undesirable noise from disc vibration, rushing air and the spindle motor itself. Most 21st century drives allow forced low speed modes (by use of small utility programs) for the sake of safety, accurate reading or silence, and will automatically fall back if numerous sequential read errors and retries are encountered. Other methods of improving read speed were trialled such as using multiple optical beams, increasing throughput up to 72× with a 10× spin speed, but along with other technologies like 90~99 minute recordable media and 'double density' recorders, their utility was nullified by the introduction of consumer DVD ROM drives capable of consistent 36× CD ROM speeds (4× DVD) or higher. Additionally, with a 700 MB CD ROM fully readable in under 2½ minutes at 52× CAV, increases in actual data transfer rate are decreasingly influential on overall effective drive speed when taken into consideration with other factors such as loading/unloading, media recognition, spin up/down and random seek times, making for much decreased returns on development investment. A similar stratification effect has since been seen in DVD development where maximum speed has stabilised at 16× CAV (with exceptional cases between 18× and 22×) and capacity at 4.3 and 8.5 GiB (single and dual layer), with higher speed and capacity needs instead being catered to by Blu ray drives. CD Recordable drives are often sold with three different speed ratings, one speed for write once operations, one for re write operations, and one for read only operations. The speeds are typically listed in that order; i.e. a 12×/10×/32× CD drive can, CPU and media permitting, write to CD R discs at 12× speed (1.76 MiB/s), write to CD RW discs at 10× speed (1.46 MiB/s), and read from CDs at 32× speed (4.69 MiB/s).

transfer, cd, rom, drives, s

New York's 11th congressional district - Election results


Structured data parsed from Wikipedia. Election results In New York State there are numerous minor parties at various points on the political spectrum. Certain parties will invariably endorse either the Republican or Democratic candidate for every office, hence the state electoral results contain both the party votes, and the final candidate votes (Listed as 'Recap'). (See Electoral fusion § New York.) 1996 election 1998 election 2000 election 2002 election

election, new, results, york, votes

2011 Los Angeles Dodgers season - Farm system


Structured data parsed from Wikipedia. Farm system

system, farm, los, 2011, angeles